ON THIS WIKI
Reinforced Portable Tank
| Reinforced Portable Tank | |
|---|---|
| |
|
| |
| Name | Reinforced Portable Tank |
| Source Mod | Thermal Expansion |
| ID Name | ThermalExpansion:Tank:3
|
| First Appearance | Thermal Expansion |
| Type | Block |
| Stackable | No |
| Blast Resistance | 360.0 |
| Hardness | -1.0 |
| Solid | Yes |
| Transparent | Yes |
| Affected by Gravity | No |
| Emits Light | No |
| Flammable | No |
| Required Tool | 
|
The Reinforced Portable Tank is a block added by the Thermal Expansion mod. It can hold 128,000 mB of liquid (128 buckets) [1]. Liquid can be inserted or extracted from the top or bottom sides or by 'Right-clicking' with a bucket. A Portable Tank placed directly on top of another will self-configure to output to the tank below. Liquids may be transferred to and from Portable Tanks using Liquiduct, Fluid Pipe or the EnderIO Fluid Conduit and/or Pressurized Fluid Conduit. The Portable Tank is explosion resistant with a blast value of 360. Using a Crescent Hammer on a Portable Tank will toggle the bottom side to output (orange). The tank still receives liquid from the top side. The Tank with its content is removed for transport by 'Shift+Right-clicking' with the Crescent Hammer or Yeta Wrench.
Contents
Recipe[edit]
Usage[edit]
Reinforced Portable Tank can be used to create the following items:
Note[edit]
- ↑ In Thermal Expansion it holds 32,000 mB of liquid (32 buckets).
- ↑
Hardened Glass can be substituted with the following items: 
Fused Quartz, 
Hardened Lumium Glass.
See Also[edit]
The following items may also be of interest:
Discussion
.png){kind=link}
.png){kind=link}
.png){kind=link}
.png){kind=link}
